Klevacool fridge fans have always been recognised for their quality.

Our fridge fan kits now come with a 3 year warranty.

✅ General Features

• 3 year warranty – built to last.

• Neat, professional finish using laser-cut aluminium plate.

• No drilling or gluing required – fans simply clip on.

• Low power draw – only 0.35A total at full speed, 14mA standby.

• Stainless hardware – no rusty screws.

• Access hatch for easy controller access.

• Fully tested before shipping.

🌬 SMART Fans

• Move up to 1640L/min EACH.

• Speed varies with system requirements – less noise, less wear, less power use.

• Safety shutdown if blades are blocked; restart when free (no burnouts).

• Extremely quiet blade design with reduced cycling noise.

• IP68 rated, rubber-sealed ball bearings – no dust or water ingress.

🎛 Klevacool™ Electronic Fan Controller

• Designed & assembled in Australia for harsh RV conditions.

• Switch-selectable temperature settings.

• Bypass/test switch for peace of mind.

• Multicolour LED for easy status indication.

• Over-temperature alarm if vent area gets too hot.

• Reverse polarity protection – safe if wired incorrectly.

• Separate protected output for internal fridge fan kits.

• Connector port for the Klevacool™ Remote.

• Temperature sensor built-in (no dangling probes).

• Conformal coated for moisture protection.

🔗 Internal Fans

• Internal fans mount inside your fridge, circulating cold air evenly.

• Helps prevent frost build-up and keeps all areas cold.

• Available for both absorption fridges and compressor fridges.

• More info available here.

🛡 Design Registrations

• 202315998, 202315996, 202315997

🔧 Mounting Plate & Installation

• IP registered, laser-cut aluminium plate clips neatly onto Dometic vents.

• Plate self-aligns – quick install in minutes.

• Mounts both fans and controller together for simplicity.

• Step-by-step photo instructions included (with phone support).

• Installation process:

  1. Remove vent cover (4 screws).

  2. Clip fan plate onto vent.

  3. Connect to 12V supply or battery management system.

  4. Refit vent cover.

Detailed, step by step instructions with photos are provided & include my phone number for support.

Any questions prior to purchase of a kit will be promptly answered using our contact page.

Important Notes!

• The vent MUST have the vertical sections, shown in the picture below, to enable the fans to mount correctly.

• This fan system is specifically designed to fit the DOMETIC rooftop fridge vents, as used on some caravans.

• This kit will NOT fit Thetford rooftop vents.

• Fans must be installed in the upper vent, mounted on the roof.

• The vents shown in the pictures are not supplied. The fan mounting plate supplied in the kit is clipped onto your existing vent.

• Installation of these fans is simple, but a power supply is required for them to operate. Wiring will need to be installed from the van electrical system to the vent. 4 meters of wire is included.

• We don't recommend connecting directly to the battery as this will bypass any battery low voltage protection devices in your van.

• If you are unsure how to install this wiring, please consult with your local auto electrician or caravan repair shop.

• Detailed installation instructions are included.

INCLUDED IN KIT

• 3 x quiet, high quality, IP68, brushless smart fans with rubber sealed ball bearings. 

• 1 x Klevacool fan controller

• 1 x fuse holder

• 2 x 3A fuses

• 1 x laser cut aluminium mounting plate including Klevacool controller mounting system.

• 4 meters of wire for battery connection.

• Four pin connector

• Short length of spiro wrap 

• zip ties in both black & white

• Installation instructions

This product carries a 36 month warranty.