Scroll
Power Cables, Mounts, Converters & Weatherproof Outlets for Starlink Mini
Featured
from $3.50
This fuse holder is designed to be connected in series with a cable to protect against overloads.
The cables are smaller than usual, at 18 Gauge, making them easier to connect to thinner wires.
They also have a cap to protect the fuse from dust & water.
Available as single units or in lots of 10.
Fuse not included!
******
Specs:
Fuse size: mini blade
Max load: 8 amps
Cable length: approx 15cm either side of fuse holder body
Cable size: 18 Gauge (3mm automotive)
$15.00
Your Starlink Mini is a game-changer on the road — but dust, dirt, and moisture in the power plug can stop it in its tracks. A dirty or wet connector means no signal when you need it most.
The Starlink Mini Power Connector Caps keeps your plugs clean, dry, and ready for action. Printed in four bright colours — Orange, Yellow, Blue, and Pink — they’re easy to spot and hard to lose. Each cap features a large finger pull so you can remove it without fumbling, and a handy lanyard to attach it to the cable so it’s always where you need it.
Sold in sets of two, so you’ve got both ends covered — or a spare for peace of mind. You’ll know it’s sealed properly when you hear that satisfying “pop” as it comes off.
Fasten them to your cable with the supplied lanyard or simply ziptie them to the cable.
Tough, practical, and simple to fit — this is a small upgrade that saves you from a big headache.
Proudly designed and made in Australia. Quality and innovation matter.
Protect your Starlink Mini plugs – grab your set of 2 now.
NOTE: Starlink cable is not included.
from $59.00
Sick of dodgy caravan power connections for your Starlink Mini?
This tough, surface-mount power port is made to suit the Starlink Mini plug properly — no wobbles, no leaks, and no wondering whether it will stay secure on the road.
It mounts neatly to the side of your caravan and angles downward to help reduce strain on the cable while keeping the weather out.
The plug fits snugly into the socket for a secure, weatherproof connection, and when it’s not in use, the screw-on cap seals tight to keep out dust, rain, and road grime.
Built from UV-resistant ABS plastic and supplied with stainless steel mounting screws, it’s made to handle Aussie sun, corrugations, and plenty of trips away. There’s also a built-in groove so you can run a bead of silicone around the base for a proper weather seal.
To make installation easier, this kit also includes a cable with a Starlink Mini connector on one end and bare wires on the other, so you can connect it into your existing electrical system without having to modify your own cable.
Why it’s useful:
Purpose-built fit for the Starlink Mini plug
Secure, neat, weatherproof connection for external power
Downward angle helps reduce strain on the cable
Screw-on cap keeps out dust, rain, and road grime
UV-resistant ABS construction made for Australian conditions
Built-in groove for a silicone weather seal
Option to add connector-to-bare-wire cable makes connection to your existing electrical system easier
What’s included:
Surface-mount Starlink Mini power port
Screw-on weather cap
Stainless steel mounting screws
Detailed instructions with drilling template
Why caravanners like it?
If you want a clean, reliable, and practical way to power your Starlink Mini, this is a simple upgrade that just works.
Designed and made with real caravan use in mind, it gives you a tidy, weatherproof connection that’s built for Australian conditions.
Order your Starlink Mini Caravan Power Port today and keep your connection secure, weatherproof, and ready for the road.
from $28.00
Tired of dodgy setups or unreliable cables that don't last more than a trip or two?
If you're running Starlink Mini in your caravan, you need a power cable that’s purpose-built — not cobbled together from cheap bits.
This cable does the job right. Designed specifically for the Starlink Mini, it gives you a reliable, waterproof power connection from 12V to 36V systems — with zero issues.
The 5.5mm x 2.1mm plug fits snug into the Starlink Mini’s input, and the silicone seal keeps dust and moisture out, even in the harshest Aussie conditions.
Available in 1.5m, 3m, 5m, or 10m lengths, each cable is made from UV-resistant PVC insulation and 18AWG wire to minimise voltage drop. That means consistent power and a stronger signal — whether you're parked up at a beachside site or off-grid in the bush.
It’s simple, durable, and made to just work — no nonsense.
$59.50
Sick of your Starlink Mini dropping out when you're off-grid?
You’re not alone. When voltage dips too low, the Starlink Mini struggles — especially on 12v setups common in caravans.
This clever little inverter solves the issue by stepping up your 12v input to the 30v your Starlink Mini actually needs. That means fewer dropouts, more stable signal, and less swearing at your satellite dish.
It’s built tough with a rugged heatsink case and sealed to IP68 for Aussie conditions. And now it’s even easier to hook up — each unit includes a snaplock quick connector for simple, tidy installs.
Designed with DIY caravanners in mind. Just screw it down, plug it in, and you’re good to go. No gimmicks — just solid, dependable gear that does what it should.
Quick connect power fitting & mounting screws included!
$15.00
Sick of trying to power your Starlink Mini with awkward adapters or unreliable setups?
This direct power lead gives you a simple, solid way to hook it straight into your 12V system or other power supply.
With a sealed Starlink-compatible plug at one end and bare wires at the other, you can connect to your preferred power source with confidence. Whether you're upgrading your caravan setup or going fully off-grid, this lead gives you control.
Built from quality materials that stand up to road life — UV-resistant insulation, silicon dust/water seals, and heavy-duty 18AWG wire to minimise voltage drop.
Simple, sealed, and ready to wire up — get your Starlink Mini powered your way.
from $123.00
Sick of Starlink Mini dropouts, messy wiring, and exposed connections?
Nothing is more frustrating than setting up camp, relying on your Starlink Mini, and then dealing with annoying dropouts because your power setup isn’t up to the job. Messy wiring, poor connection points, and dirty plugs only make things worse, especially when you are travelling in all sorts of weather and road conditions.
The Starlink Mini Caravan Power Kit is a complete, practical fix for a clean and reliable install. It gives you everything needed to power your Starlink Mini properly from a 12V setup, while helping prevent voltage-related dropouts with a sealed 12V to 30V inverter. The angled outlet creates a tidy, weatherproof external connection point, the optional power lead gives you flexibility in 3m, 5m, or 10m lengths, and the plug caps help keep unused connections protected from dust and moisture.
Built for real-world caravan use, this kit is made to be easy to install, easy to connect, and tough enough for Australian conditions. The inverter comes in a screw-mountable aluminium housing with mounting hardware included, the cable uses 18AWG wire to minimise voltage drop, and the outlet is made from UV-resistant ABS with a built-in groove for a silicone weather seal. Every part is designed to work together for a neat, dependable setup without the mucking around.
Complete kit: Includes a sealed 12V to 30V inverter, angled weatherproof outle, and a set of plug caps with thje option of adding a power cable as well.
Helps prevent dropouts: Higher 30V output supports more reliable Starlink Mini performance compared to a basic 12V feed.
Neat, tidy install: Designed to give you a clean connection point and a more professional finish on your caravan.
Weatherproof where it matters: IP68-rated components help protect your setup from dust, water, and the elements.
Made for caravan use: UV-resistant materials, secure fittings, and practical design details that suit off-grid travel.
Easy to connect: Snaplock quick connector for the inverter, ready-to-use Waterproof Starlink Mini output connection and cable length options make installation straightforward.
Protects unused plugs: Bright plug caps with lanyards help seal out dirt and moisture when disconnected.
Designed and manufactured in Australia, this is a proper & complete solution for caravanners who want gear that works, lasts, and does the job right the first time.
Quality and innovation matter, especially when staying connected off-grid matters too.
Get your Starlink Mini setup sorted properly with a neat, weatherproof kit that is easy to fit & lasts.
$39.50
Trying to set up your Starlink Mini on the road can be a bit of a circus — nowhere decent to mount it, awkward angles, and clamps that don’t quite grip properly… especially on square awning arms.
This adjustable awning mount takes the hassle out of it.
It clamps securely to your caravan awning arm, pole, or rail, then lets you dial in the exact angle you need for a solid signal — no mucking around, no guesswork.
The updated clamp design grips properly on square and rectangular sections (where most mounts fall short), so once it’s on, it stays put.
Upgraded clamp design – grips firmly on square, rectangular, and round bars without slipping
3-point angle adjustment – makes it easy to aim your Starlink for the best possible signal
Built for Starlink Mini – proper fit for stability and reliable performance
All-metal construction – aluminium and chrome-plated steel means no brittle plastic and no rust issues
Compact & travel-friendly – light enough to throw in the van and forget about until you need it
Versatile mounting options – works on awning arms, poles, rails, roof racks and more
If you’re setting up a full Starlink Mini system, these pair perfectly:
Starlink Power Cable Caps – https://www.3dprintrv.com/products/starlink-mini-plug-caps
Starlink Mini Power Cable – https://www.3dprintrv.com/products/starlink-mini-power-cable
Starlink Mini 12V to 30V Power Supply – https://www.3dprintrv.com/products/starlink-mini-12v-power-supply
Starlink Mini Power Outlet – https://www.3dprintrv.com/products/starlink-mini-45-power-outlet
Starlink Mini Caravan Complete Power Kit – https://www.3dprintrv.com/products/starlink-mini-power-kit
Simple to use, built properly, and designed to solve a real problem on the road.
Designed and manufactured with real caravanners in mind — because quality and innovation matter.
Mount your Starlink the easy way and enjoy reliable signal wherever you pull up.
from $330.00
Poor Starlink mounting setups are a pain. Loose cables, unreliable power supplies, flimsy plastic brackets and no easy way to shut the system down without climbing outside the van all get old pretty quickly.
The Starlink Mini PowerMount Pro is designed to solve all of that in one properly thought-out package.
This heavy-duty mounting system securely holds your Starlink Mini dish inside a cast aluminium frame while integrating a built-in 12V to 30V power converter, remote power control, fuse protection and tidy cable management all in the one unit.
Whether you're parked up overnight or free camping off-grid, you can remotely power your Starlink system on or off from inside the van — even from bed.
Built with attention to detail and real-world caravan and 4WD use in mind, this setup is solid, reliable and designed to work for years.
🛡️ Cast aluminium mounting frame — Strong, heat-resistant construction that won't soften or deform like plastic mounts can.
⚡ Integrated 12V to 30V converter — Provides stable power delivery to your Starlink Mini dish for reliable operation using the industry-proven Anderson-style connector system (Power lead not included).
📡 Remote power control — Turn your Starlink system on or off remotely from inside the van without going outside.
🔘 Separate ON and OFF remote buttons — Important feature that clearly confirms whether the system is powered on or off.
🎛️ Multiple power modes — Switch selectable between Always ON, OFF or Remote-Controlled operation.
🧲 Extremely strong magnetic mounting — High-strength magnets hold the mount securely in place so it won't move around while travelling or parked.
🔒 Neoprene-covered magnets — Extra grip while helping protect mounting surfaces from marks or scratches.
💡 Built-in power indicator LED — Quickly confirms when the system is powered on.
🛡️ Integrated fuse protection — Built-in fuse holder helps protect the electrical system.
📏 Professional cable management — Cables are neatly routed and secured because messy wiring isn't good enough in a proper setup.
🌬️ Cooling-focused converter placement — Converter is externally mounted to allow airflow around the unit and help maintain cooler operating temperatures for more stable operation and longer life.
🧳 Integrated dish protection cover — Helps protect the Starlink Mini dish during use and transport.
🎮 Flexible remote control options — Includes one remote control as standard. Choose from a square two-button remote available in black or white for convenient wall mounting inside your caravan, or add the compact round black remote that's ideal for mounting on a vehicle dashboard. Additional remotes are available at extra cost.
For caravanners who appreciate practical gear, reliable operation and quality engineering. Because when you're travelling, quality and innovation matter.
Stay connected wherever you pull up and enjoy a Starlink setup that's built properly from the start.
Designed for real touring — not showroom conditions.
Mount it once and get reliable Starlink wherever the road takes you.
$63.00
Sick of your Starlink Mini dropping out when you’re off-grid?
You’re not alone. When the voltage dips too low, the Starlink Mini can struggle — especially on the 12V setups commonly used in caravans.
This clever little inverter solves the issue by stepping up your 12V input to the 30V your Starlink Mini needs. That means fewer dropouts, a more stable connection, and less swearing at your satellite dish.
It’s built tough with a rugged heatsink case and sealed to IP68 for Aussie conditions. The power input wiring also comes with an Anderson connector already attached, making it simple to connect to a compatible 12V power supply without mucking around with extra fittings.
Designed with DIY caravanners in mind.
Just screw it down, connect the Anderson plug, and you’re good to go.
No gimmicks — just solid, dependable gear that does what it should.
$49.50
Don’t head outside or start pulling cables just to switch off your Starlink power!
This remote relay lets you cut the supply from inside your caravan or vehicle using the included keyfob remotes.
The relay simply connects between your caravan or vehicle power supply and the Starlink power converter. When Starlink isn’t being used, switch it off remotely to reduce unnecessary battery drain—especially important when you’re caravanning off-grid.
For a tidy Starlink Mini setup, pair it with our Starlink Mini 12V to 30V Inverter or add it to the Starlink Mini Caravan Power Kit.
Two keyfob style remotes are included & extra wall-mounted remotes are also available for a fixed control point inside your caravan or vehicle.
📡 Remote control: Switch Starlink power without leaving your caravan or vehicle
🔋 Lower power use: Shut down Starlink when it isn’t needed to help conserve battery power
🔧 Simple inline fit: Connects between your battery supply and Starlink voltage converter
✅ Ready to use: The relay and key fob remotes arrive tested, matched and pre-programmed
🏠 Extra remote option: Wall-mounted styles provide a fixed control point inside
⚡ Versatile switching: Suits common DC caravan power setups within its rated limits
Because Quality & Innovation Matter, every unit is tested and programmed to match its supplied remotes before dispatch.
Take control of your Starlink power from inside!
A neat rocker switch with a red led in the actuator that lights up when the switch is on.
Positive switching action.
Requires a 12mm round hole for mounting.
Also includes wiring diagram for connecting into fridge fan circuit.