Scroll
Australian-Made, Stronger-Than-Original Door Latches, Strikers & Spare Parts
Featured
$34.50
This item includes a lifetime warranty & free postage.
Has your camper door latch finally given up?
It’s a frustrating little part when it breaks — especially when the rest of the door and latch assembly are perfectly fine. This solid replacement door latch tongue is compatible with Jayco camper doors from around 2013 onwards and is designed to fit straight into the existing latch assembly.
No drilling. No modifications. No need to replace more than you have to.
Why caravanners choose the 3DPrintRV replacement latch tongue:
• 💪 Built for the job – Manufactured from our carefully selected engineering-grade material for the strength and durability needed in a hard-working door component.
• 🧱 Solid construction – Printed solid, with no internal infill pattern or deliberately hollow sections that could compromise the part where it matters.
• ⚙️ Strength-conscious print orientation – Manufactured in an orientation specifically chosen to improve strength where the latch needs it.
• 🔧 Direct-fit replacement – Designed as a replacement door latch tongue compatible with Jayco camper doors from around 2013 onwards.
• 📄 Easy DIY installation – Fits into the existing latch assembly with no drilling or modifications required. Clear fitting instructions are included.
• ⚫⚪ Available in black or white – Choose the colour that best suits your existing door hardware.
• Designed and manufactured in Australia – Made by 3DPrintRV for Australian caravanners who would rather repair a perfectly good door than replace more than they need to.
Why material choice matters:
Not all 3D-printed parts are manufactured the same way. For a hard-working component like a door latch tongue, the material, print orientation and construction all matter.
Rather than choosing a material simply because it’s easier to manufacture, we use a carefully selected engineering-grade material (not PETG) for this component. Combined with solid construction and a strength-conscious print orientation, it’s our approach to producing a practical replacement part built for its intended job.
We keep the exact material formulation and manufacturing process in-house. What matters to you is simple: the part has been designed and manufactured with its real-world use in mind.
Lifetime Warranty!
We’re confident in the way these latch tongues are made, so they’re backed by our no-fuss lifetime warranty:
You break it, we replace it — after a quick chat.
Free tracked postage Australia-wide via Australia Post.
Fix that broken latch properly and get back to enjoying the van — order your Australian-made replacement today.
Designed and manufactured in Australia by 3DPrintRV, because Quality & Innovation Matter.
$32.50
This item includes a lifetime warranty & free postage.
Camper door latch broken?
This door latch is a direct replacement for those fitted to Jayco campers Prior to 2013.
Designed with reinforcement in key areas & 3D printed in a sideways orientation for increased strength, this latch is far stronger than the original.
Free postage on this item using Australia Post (tracked).
WARRANTY - You break it, we replace it (after some questions…)
Installation instructions are included.
Door latch frame NOT included. Sale is for replacement latch only.
Australian Made
$31.50
Free Postage Australia Wide!
Camper door striker broken?
This door striker is a direct replacement for those fitted to Jayco camper, prior to 2013.
It's a direct replacement for the small black one fitted to earlier model RV's.
Designed with reinforcement in key areas & 3D printed from NYLON, in a sideways orientation for increased strength, this latch is far stronger than the original.
Door latch & frame NOT included. Sale is for replacement striker only.
Australian Made!
$15.00
Are your caravan window blinds not staying fully closed?
No need to replace springs, use one of our clips to hold it up!
Designed to suit Dometic Mobicool blinds.
Sold in pairs.
*
IP Rights Protected.
Des. Reg. 202313993
$34.50
Free Postage Australia Wide!
Caravan or RV shower door latch broken?
This latch/clip is a direct replacement .
Designed with reinforcement in key areas & 3D printed from NYLON, this latch is far stronger than the original.
Sale is for replacement striker only.
Engaging pin is not included (these usually don’t break).
Australian Made!
*
IP Rights Protected.
Des. Reg. 202314003
from $85.50
📦 ORDERS OVER $300 SHIP FREE!
🚚 TRACKED POSTAGE AUSTRALIA WIDE!
Is your caravan or camper awning light blinding you?
NOW AVAILABLE IN RED/WHITE/AMBER LED COLOURS!
Our LED awning lamp is the solution!
Includes 3DprintRV adaptor plate that allows direct mounting of lamp in same position as original (NO DRILLING)
Three brightness settings!
Three colour settings (White, warm white & orange OR white, amber & red to keep the bugs away!)
Simple touch switch operation (simple!).
LEDS are angled down so they’re not shining directly in your eyes!
Passive infrared movement sensor to automatically turn the light on at night (Can be deactivated)!
IP67 ingress protection (water & dust proof)!
Stainless steel Nyloc hardware supplied!
Can be switched off at light itself (have to run through all colour modes) or switched off by caravan light switch.
Lamp saves last setting when power removed. Turns back on with same settings.
Detailed fitting & operation instructions supplied.
Compatible with Jayco awning lights fitted to campers & other caravans (check dimensions for suitability)
*
Simple, No-Drill Installation in Minutes
Fitting is really easy!
Remove the old lamp.
Connect the wires to the new lamp.
Screw the adaptor plate in place (uses same mounting holes!)
Bolt the new LED lamp to the adaptor plate.
Detailed fitting & operation instructions are supplied.
*
12 months warranty.
Design registrations: 202314584, 202314585.
*
SPECS:
800Lumens at max brightness.
140mA at min brightness @ 12.9v.
370mA at max brightness @12.9v.
Base dimensions: 150mm x 90mm.
Height: 55mm.
Select from white or black lamp from the drop down box below.
from $95.50
📦 ORDERS OVER $300 SHIP FREE!
🚚 TRACKED POSTAGE AUSTRALIA WIDE!
NOW AVAILABLE IN WHITE/RED/AMBER OPTION!
Wish your awning lamp would come on automatically?
Our Oval LED awning lamp is the solution!
Inludes 3DprintRV adaptor plate that allows direct mounting of our lamp in same position as original (NO DRILLING)
Three brightness settings, simply by touching a button!
Three colour settings (White, warm white & orange OR white, amber & red to keep the bugs away!)
Simple touch switch operation (simple!).
LEDS are angled down so they’re not shining directly in your eyes!
Passive infrared movement sensor to automatically turn the light on at night!
IP67 ingress protection (water & dust proof)!
Stainless steel Nyloc hardware utilised (No rust & won’t come loose!)
Can be switched off at light itself (have to run through all colour modes) or switched off by caravan light switch.
Lamp saves last setting when power removed. Turns back on with same settings.
Detailed fitting & operation instructions supplied.
Compatible with oval shaped awning lights fitted to campers & other caravans (check dimensions for suitability)
Cable exits in the same position as old lamp.
*
Simple, No-Drill Installation in Minutes
Fitting is really easy!
Remove the old lamp.
Connect the wires to the new lamp.
Screw the new lamp in place (uses same mounting holes!)
Detailed fitting & operation instructions are supplied.
*
12 months warranty.
Design registration: 202317366
*
SPECS:
800Lumens at max brightness.
140mA at min brightness @ 12.9v.
370mA at max brightness @12.9v.
Base dimensions: 253mm x 90mm.
Height: 57mm.
Select black or white using the drop down box below.
$39.50
Can't find the right fuse for your car or caravan?
Our comprehensive Automotive Blade Fuse Kit has you covered!
This all-in-one kit includes standard, mini, and low profile mini fuses, ensuring you'll always have the correct size on hand.
Plus, it comes with TWO test lights and TWO blade fuse removal tools.
Never be without the right fuse again!
Struggling to unplug tight power connectors without yanking on the cable?
Over time, pulling directly on the leads can strain the wiring and make connecting or disconnecting power more awkward than it needs to be.
This T-Handle compatible with Anderson™ SB50™ connectors gives you a much easier and safer way to insert or remove your plugs. The handle provides a solid grip point, helping reduce strain on cables while making connection and removal simple — especially in tight spots or when plugs are stiff.
Built from strong UV-stable plastic and designed for quick installation, it bolts straight onto the connector using the included hardware.
No complicated fitting or special tools required — just a practical upgrade that makes everyday caravan setup easier.
⚙️ Easy to Use — Makes plugging and unplugging far easier, especially with tight connectors
🔧 Reduces Cable Strain — Helps prevent stress on wiring caused by pulling directly on cables
☀️ UV-Stable Material — Made from durable plastic designed to handle Australian conditions
🛠️ Simple Installation — Fits using two bolts and nuts with mounting hardware included
🚐 Designed for Caravanners — A small upgrade that makes everyday setup and pack-up easier
Make plugging and unplugging easier with a simple upgrade that protects your cables and reduces frustration.
“Anderson” & “SB50” are trade marks of Anderson Power Products, Inc.