Scroll
Triple Colour LED Awning Lamps, Adaptor Plates & Outdoor Lighting for Caravans & RVs
Featured
from $85.50
📦 ORDERS OVER $300 SHIP FREE!
🚚 TRACKED POSTAGE AUSTRALIA WIDE!
Is your caravan or camper awning light blinding you?
NOW AVAILABLE IN RED/WHITE/AMBER LED COLOURS!
Our LED awning lamp is the solution!
Includes 3DprintRV adaptor plate that allows direct mounting of lamp in same position as original (NO DRILLING)
Three brightness settings!
Three colour settings (White, warm white & orange OR white, amber & red to keep the bugs away!)
Simple touch switch operation (simple!).
LEDS are angled down so they’re not shining directly in your eyes!
Passive infrared movement sensor to automatically turn the light on at night (Can be deactivated)!
IP67 ingress protection (water & dust proof)!
Stainless steel Nyloc hardware supplied!
Can be switched off at light itself (have to run through all colour modes) or switched off by caravan light switch.
Lamp saves last setting when power removed. Turns back on with same settings.
Detailed fitting & operation instructions supplied.
Compatible with Jayco awning lights fitted to campers & other caravans (check dimensions for suitability)
*
Simple, No-Drill Installation in Minutes
Fitting is really easy!
Remove the old lamp.
Connect the wires to the new lamp.
Screw the adaptor plate in place (uses same mounting holes!)
Bolt the new LED lamp to the adaptor plate.
Detailed fitting & operation instructions are supplied.
*
12 months warranty.
Design registrations: 202314584, 202314585.
*
SPECS:
800Lumens at max brightness.
140mA at min brightness @ 12.9v.
370mA at max brightness @12.9v.
Base dimensions: 150mm x 90mm.
Height: 55mm.
Select from white or black lamp from the drop down box below.
from $95.50
📦 ORDERS OVER $300 SHIP FREE!
🚚 TRACKED POSTAGE AUSTRALIA WIDE!
NOW AVAILABLE IN WHITE/RED/AMBER OPTION!
Wish your awning lamp would come on automatically?
Our Oval LED awning lamp is the solution!
Inludes 3DprintRV adaptor plate that allows direct mounting of our lamp in same position as original (NO DRILLING)
Three brightness settings, simply by touching a button!
Three colour settings (White, warm white & orange OR white, amber & red to keep the bugs away!)
Simple touch switch operation (simple!).
LEDS are angled down so they’re not shining directly in your eyes!
Passive infrared movement sensor to automatically turn the light on at night!
IP67 ingress protection (water & dust proof)!
Stainless steel Nyloc hardware utilised (No rust & won’t come loose!)
Can be switched off at light itself (have to run through all colour modes) or switched off by caravan light switch.
Lamp saves last setting when power removed. Turns back on with same settings.
Detailed fitting & operation instructions supplied.
Compatible with oval shaped awning lights fitted to campers & other caravans (check dimensions for suitability)
Cable exits in the same position as old lamp.
*
Simple, No-Drill Installation in Minutes
Fitting is really easy!
Remove the old lamp.
Connect the wires to the new lamp.
Screw the new lamp in place (uses same mounting holes!)
Detailed fitting & operation instructions are supplied.
*
12 months warranty.
Design registration: 202317366
*
SPECS:
800Lumens at max brightness.
140mA at min brightness @ 12.9v.
370mA at max brightness @12.9v.
Base dimensions: 253mm x 90mm.
Height: 57mm.
Select black or white using the drop down box below.
from $55.00
Already have a triple colour LED awning lamp?
You’d think it’d be a simple swap — but if the new lamp’s footprint is smaller or just slightly different, the mounting holes won’t line up and you’re left patching holes or staring at a faded “ghost outline”.
This Adaptor Plate Kit fixes that properly.
This kit is made for anyone who’s already bought a “looks-the-same” LED awning lamp and then discovered it won’t mount neatly on the original base.
The adaptor plate lets our triple colour LED lamp mount in the exact same footprint as your original lamp using the same mounting holes. That means no drilling, no stuffing around, and the adaptor plate covers the old footprint so you don’t see colour differences from age or fading.
• ✅ UV-stable ABS adaptor plate — strong and practical, built for Aussie conditions
• ↘️ Slight mounting angle helps reduce frontal glare and throws light where you need it
• 📄 Detailed instructions included so you’re not guessing
• 🔩 Stainless bolts + NYLOC nuts to retain the LED (when fitted)
• 🧩 Blanking plugs included to neatly finish off unused screw holes
• ✅ Designed and manufactured in Australia — because quality and innovation matter
Upgrade your lamp the easy way — no drilling, no drama.
Compatible with Jayco awning lights fitted to campers & other caravans (check dimensions for suitability)
12 months warranty.
Design registrations: 202314584, 202314585
THIS IS AN ADAPTOR KIT ONLY. NO LED LAMP IS INCLUDED.
ONLY COMPATIBLE WITH SAME STYLE LED LAMP AS SHOWN IN PICTURES.
If you’re looking for a complete kit including a motion sensing LED lamp, click here.
Select from white or black adaptor plate from the drop down box below.
from $65.00
Already have a triple colour LED awning lamp?
You’d think it’d be a simple swap — but if the new lamp’s footprint is smaller or just slightly different, the mounting holes won’t line up and you’re left patching holes or staring at a faded “ghost outline”.
This Adaptor Plate Kit fixes that properly.
This kit is made for anyone who’s already bought a “looks-the-same” LED awning lamp and then discovered it won’t mount neatly on the original base.
The adaptor plate lets our triple colour LED lamp mount in the exact same footprint as your original lamp using the same mounting holes. That means no drilling, no stuffing around, and the adaptor plate covers the old footprint so you don’t see colour differences from age or fading.
• ✅ UV-stable ABS adaptor plate — strong and practical, built for Aussie conditions
• ↘️ Slight mounting angle helps reduce frontal glare and throws light where you need it
• 📄 Detailed instructions included so you’re not guessing
• 🔩 Stainless bolts + NYLOC nuts to retain the LED (when fitted)
• 🧩 Blanking plugs included to neatly finish off unused screw holes
• ✅ Designed and manufactured in Australia — because quality and innovation matter
Upgrade your lamp the easy way — no drilling, no drama.
Compatible with Jayco awning lights fitted to campers & other caravans (check dimensions for suitability)
12 months warranty.
Design registration: 202317366
THIS IS AN ADAPTOR KIT ONLY. NO LED LAMP IS INCLUDED.
ONLY COMPATIBLE WITH SAME STYLE LED LAMP AS SHOWN IN PICTURES.
If you’re looking for a complete kit including a motion sensing LED lamp, click here.
Select from white or black adaptor plate from the drop down box below.
$28.50
Nothing kills a good stopover faster than stepping out into the dark and getting smashed by bugs.
The Solar Security Light & Bug Zapper gives you motion-sensing white light for extra safety and security around your caravan, while the built-in bug zapper helps cut down the insect problem. It is solar powered, easy to mount, and designed as a set-and-forget upgrade that works quietly in the background so you can get on with enjoying your trip.
Motion-sensing white light helps light up entry points and outdoor areas when movement is detected
Select between Warm White or Cool White Light. Options already built in.
Built-in bug zapper helps reduce insects around camp for a more comfortable setup
Solar powered operation means no batteries to replace and no extra fuss
Easy mounting makes it a practical DIY upgrade for caravanners who want something straightforward
Waterproof design is built for outdoor use and everyday touring conditions
Set-and-forget convenience means once it is mounted and charged, it just works
Designed and manufactured with practical caravanners in mind, this is one of those upgrades that solves two annoying problems at once. It is a simple, useful addition to your setup that proves quality and innovation matter.
Fit it once and enjoy better security, safer steps outside, and fewer mozzies around camp.
from $45.00
Tired of harsh awning lights that attract every bug in the park… or worse, no light at all when you step outside at night?
This compact caravan awning LED lamp gives you proper lighting where and when you need it — without the glare, without the bugs, and without wasting power.
It’s fitted with a built-in motion sensor, so the light only comes on when it detects movement. Handy for late-night trips outside, keeping an eye on things around the van, or just not fumbling around in the dark.
You’ve also got full control over the light colour. Run white for maximum brightness, or switch to warm, amber, or red tones to cut down insect attraction and make your setup more comfortable at night.
Triple colour options – Three colour settings (White, warm white & orange OR white, amber & red to keep the bugs away!)
Three brightness levels – Adjust light output depending on what you need
Motion sensing – Automatically turns on when movement is detected (can be switched off if not needed)
Downward angled LEDs – Lights up your area without blasting you in the eyes
Simple touch control – Easy to cycle through modes and settings
Remembers last setting – Powers back on exactly how you left it
Low power draw – Efficient operation with minimal drain on your setup
Built tough – Sealed against water and dust with stainless steel fasteners throughout
This is the same proven lamp used in our adaptor-mounted kits — just without the rear plate, making it ideal if you’re mounting directly or replacing an existing light.
Designed and tested for real caravanning conditions, this is a simple upgrade that just works. Because at the end of the day, quality and innovation matter.
Upgrade your awning lighting to something that actually works — fit it once and forget about it.
If looking for this lamp with a backing plate to enable drilling free mounting where your original awning lamp is mounted, check out these options:
Rectangular original lamp: https://www.3dprintrv.com/products/led-awning-lamp-triple-colour
Oval original lamp: https://www.3dprintrv.com/products/oval-led-awning-lamp-triple-colour
from $25.00
Getting up in the middle of the night shouldn’t mean fumbling around in the dark or blasting your eyes with harsh lights.
Whether it’s a trip to the loo or grabbing a drink, most vans just aren’t set up with practical night lighting where you actually need it.
This indoor walkway motion sensor light fixes that. It automatically lights up when you move, casting a soft, warm glow down onto the floor — right where you need it — without lighting up the whole van or disturbing anyone else.
It’s simple to install and even easier to live with:
Motion activated – Turns on when you need it, off when you don’t
Warm, low-glare light – Easier on the eyes and less likely to disrupt sleep compared to harsh blue-toned lighting
Floor-focused lighting – Aimed downward so you can see where you’re walking without waking others
Rechargeable battery – No wiring required, with up to 3 months use per charge (depending on use)
Magnetic mounting – Self-adhesive base with magnetic light for easy removal and charging
3 brightness levels – Adjust the light to suit your setup and preference
It’s a simple upgrade that just makes sense — safer night movement, better comfort, and no mucking around with wiring.
Designed for real caravanners who want gear that works properly. Proudly part of the 3DprintRV range — because quality and innovation matter.
Stop fumbling around in the dark — add a simple lighting upgrade that just works.
Experience Superior Protection with Our High-Quality Mosquito Killer Lamp!
Upgrade your pest control with our Mosquito Killer Lamp, crafted from high-quality, wear-resistant materials for long-lasting use.
This powerful lamp utilizes high-intensity ultraviolet rays to effectively attract and eliminate mosquitoes and other harmful flying insects.
Designed for both indoor and outdoor use, it also functions as a daily lamp, providing versatile lighting solutions for any situation.
Portability is key with this lamp, featuring dual charging methods: solar or USB.
Whether you're camping, hiking, night fishing, or simply using it at home, this lamp ensures you have a reliable source of light and mosquito protection.
Don't compromise on comfort and convenience—choose our Mosquito Killer Lamp for all your lighting and pest control needs.