Panel Mounting for TWO 50 Amp Plugs with Dust Covers
Panel Mounting for TWO 50 Amp Plugs with Dust Covers
This is a fully enclosed panel mount cover for TWO 50A plugs/connectors with dust covers included.
The mounting covers the wires & holds the connectors.
The dust cover keeps dust & insects out of the plugs.
This cover can replace the panel mount cigarette lighter used on some vans.
Also great for mounting two 50A connectors to a flat surface without the wires showing.
Choice of black, white, blue, grey or red available!
Our mount has the following features:
The lower plate keeps the plug away from the surface it's mounted to & reduces the chances of scratching when the plug is removed.
The mount covers the wires & their exit hole from the panel.
The lower plate can also be used as a drilling template
The dust cap is retained using a wire loop that is held between the lower plate & the top of the cover.
Dust cap retaining wire can be mounted on left or right side of cover.
Supplied with stainless steel hardware for plug retention & mounting.
3D printed using High Impact ABS & supplied with Stainless steel mounting screws.
50 Amp connector isn't included, but can be ordered here.
Red T-handle isn't included, but can be ordered here.
Australian Made
Product Specifications
Size & Materials
98mm long x 113mm wide x 28mm high
Made from High impact ABS plastic.
Supplied screws protrude 8mm from the bottom of the mounting.
You will receive:
7 x 8G x 19mm stainless self tapping screws & washers.
2 x Stainless plug retaining bolts & nuts.
1 x Dual 50A connectorflush mount as in pictures.
2 x dust covers with wire retaining loop.
Please note! Plug (s) & T-handles are not included.
